Tenor Wrap Parts

This tube is helpful in some tenor trombone wraps

Nickel ferrule for connecting our tenor wrap tubes together

Nickel ferrule for connecting our tenor rotary valve to our wrap tubes

Nickel Tuning Slide Crook for tenor wrap!  Special touch for your tenor wrap

Tuning slide crook for our tenor trombone wrap 5.18" OD span    4" ID span

Brass Inner Tubes have a nice fit in our nickel outer tubes.  6.5" long 

Nickel Outer Slide Tube Fits Well With the Brass Inner Tubes.  6.625" Long

 This is a tenor trombone large 90 wrap tube 

 This is a tenor trombone 45 wrap tube 

 This is a tenor trombone small 90 wrap tube 

The special sound of nickel tubes! This tenor nickel small 90 wrap tube will give you that For our tenor trombone wrap

Used in tenor trombone wraps

Our newly designed tenor offset tube comes into the tenor valve squarely, and seats well in the valve port opening.  Excellent upgrade in this tube!

These tubes are typically used in pairs. 80 tubes replace the 45 and 90 tubes on an axial conversion.  Use 2 for a cleaner look, and a more open softer curve for air flow. 

There is nothing like the sound of nickel tubes! Two 80 tubes can replace the 45 and 90 tubes on an axial conversion for a cleaner look, and softer more sweeping curve for better air flow. 

This tube makes some tenor rotary conversions much easier and cleaner.  It lends itself to a different look on the tenor wrap

This tube is used in some rotary conversions. Inner span is  2.15"  Outer span is 3.35"  Tube OD is .600"  Tube ID is .560"